Same-day service for dripping, leaking, and broken faucets

Faucet repair Decatur GA done right the first time

When you need faucet repair Decatur GA homeowners trust, we show up with the right parts and fix it on the first visit. We handle kitchen faucet repair Decatur GA, bathroom fixtures, and outdoor spigots across DeKalb County. A dripping faucet wastes water and drives up your bill. We stop the leak, restore full pressure, and test every connection before we leave.

↗
Fast online booking

Request service today

Tell us what is happening. Our local team will confirm your visit shortly.

No spam. No obligation. Just practical help.
Thanks — we'll call shortly to confirm your visit.
Faucet Repair in Decatur, Georgia
Careful work. Honest options.
About this service

What faucet repair Decatur GA actually involves

Faucet repair Decatur GA means diagnosing why water escapes where it should not, then replacing the failed component. That could be a worn cartridge, a cracked ceramic disc, a corroded valve seat, or a supply line that has given out. We shut off the water, disassemble the fixture, inspect the internal parts, and swap what is worn. We use pipe wrench, Teflon tape, and pipe dope on threaded connections. Most repairs take 45 to 90 minutes. If the faucet body is cracked, we recommend replacement instead of a repair that will not hold.

Decatur homes deal with hard water that leaves mineral scale inside faucets. That scale grinds down cartridges and shortens fixture life. Older homes in Winnona Park and Oakhurst often have original brass valves that need careful handling. When you search for faucet repair near me Decatur GA, you want someone who knows these older systems. We carry Moen, Delta, and Kohler cartridges on the truck so we can finish the job in one trip. If you have a dripping faucet fix Decatur Georgia that keeps coming back, the seat or valve may need replacement, not just a new washer.

  • ✓ Stop wasting water
  • ✓ Prevent cabinet damage
  • ✓ Restore full water pressure
  • ✓ Avoid emergency calls
What's included

What our faucet repair includes

Every faucet repair includes diagnosis, parts, labor, and testing. We tell you upfront if something falls outside a standard repair so there are no surprises.

✓

Full faucet diagnosis

We take the faucet apart and inspect every internal component. Cartridge, O-rings, seals, valve seat, and supply lines all get checked. You get a clear explanation of what failed and why.

✓

Replacement parts

We use matched cartridges and new seals from Moen, Delta, and Kohler. Standard parts are included in the quoted price. If a specialty part is needed, we tell you before ordering it.

✓

Supply line inspection

We check the supply lines and shutoff valves while the faucet is apart. If a line is brittle or a valve will not close fully, we let you know. Replacing them during the repair saves a second call later.

✓

Leak testing

After reassembly, we run hot and cold water through the faucet. We check for drips at the spout, under the sink, and at every connection. You inspect the work with us before we pack up.

✓

Cleanup and haul-away

We wipe down the sink, counter, and cabinet floor. Old parts and packaging go with us. You are left with a working faucet and a clean workspace.

How it works

How our faucet repair process works

01

Call and schedule

You call or book online. We ask what the faucet is doing and which room it is in. We give you a two-hour arrival window and call when we are on the way. Same-day slots are available for most calls before 2 p.m.

02

Diagnose the problem

We shut off the water and take the faucet apart. We check the cartridge, O-rings, valve seat, and supply lines. You get a clear explanation of what failed and what it takes to fix it. Diagnosis takes 15 to 20 minutes.

03

Quote and approve

We give you the price before we start. No surprises. If the faucet is too far gone to repair, we tell you and quote a replacement instead. You decide what you want to do. We do not pressure you either way.

04

Complete the repair

We replace the failed parts using matched cartridges and new seals. We use Teflon tape and pipe dope on all threaded connections. The repair itself takes 30 to 60 minutes depending on the faucet type and access.

05

Test and clean up

We turn the water back on and run the faucet through hot and cold cycles. We check for drips at the spout and under the sink. We wipe down the area and take our tools with us. You inspect the work before we leave.

Tools & methods

Tools and methods we use for faucet repair

Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.

Pipe wrench

Used to loosen and tighten supply line connections and valve bodies without stripping the fittings.

Teflon tape and pipe dope

Applied to threaded connections to create a watertight seal and prevent future leaks at the joint.

Moen, Delta, and Kohler cartridges

Matched replacement cartridges carried on the truck so most faucet repairs finish in one visit.

Leak detection equipment

Used when a faucet leak may be connected to a hidden pipe leak behind the wall or under the slab.

Pipe cutter and soldering torch

For repairing or replacing damaged copper pipe and PEX tubing connected to the faucet supply.

Real results

Before and after.

Kitchen faucet drip stopped in one visit

Before

A homeowner in Winnona Park had a kitchen faucet dripping once per second for three months. The water bill had climbed by $40 a month. The cartridge was worn out from hard water scale.

After

We replaced the Moen cartridge and cleaned the aerator. The drip stopped completely. The homeowner's next water bill dropped back to normal. Total repair time was 50 minutes.

Bathroom faucet leak stopped before cabinet damage

Before

A 1960s home in Oakhurst had water pooling under the bathroom sink. The original brass valve seat was corroded and the supply line was brittle. The cabinet floor was starting to soften.

After

We replaced the valve seat, both supply lines, and the shutoff valves. The leak stopped and the cabinet stayed dry. We also checked the other bathroom faucet and found early wear before it became a problem.

Outdoor spigot repaired after winter freeze

Before

A North Decatur home had a cracked outdoor spigot after a hard freeze. Water was spraying into the wall every time the spigot was turned on. The copper pipe behind it had split.

After

We cut out the damaged copper pipe and soldered in a new section. Replaced the spigot with a freeze-resistant model. Tested under full pressure with no leaks. The repair took about 90 minutes.

Problems we solve

Faucet problems we fix every day

These are the most common faucet issues we see in Decatur homes. If yours is doing any of these, call us before it gets worse.

Ask a pro →
01

Faucet drips constantly even when fully closed

We replace the worn cartridge or valve seat causing the drip. Most repairs take under an hour. You get a fully sealed faucet and a lower water bill.

↗
02

Water pools under the sink after every use

We find the source, whether it is a failed O-ring, loose packing nut, or cracked supply line. We replace the failed part and test under pressure. The leak stops and your cabinet stays dry.

↗
03

Low water pressure from the faucet

We clean or replace the aerator and clear scale from the cartridge ports. If the supply line is restricted, we replace it. You get full pressure back at the tap.

↗
04

Faucet handle is stiff or will not turn smoothly

We disassemble the handle, clean mineral buildup, and replace worn O-rings or the cartridge. The handle turns smoothly again without forcing it.

↗
Transparent pricing

Faucet repair pricing in Decatur

$150 - $450 depending on faucet type and parts needed

Typical 2026 pricing for faucet repair in Decatur ranges from $150 to $450 depending on the faucet type and what failed. A simple cartridge replacement is at the lower end. A faucet with corroded valves, difficult access, or a cracked body runs higher. We quote the exact price before we start. No hourly billing, no parts markup added later. If you need kitchen faucet replacement Decatur GA instead of a repair, we quote that separately so you can compare.

A faucet repair costs less than replacing the fixture and far less than repairing water damage. Fixing the drip now saves water, protects your cabinets, and avoids an emergency call later.

01Faucet type and brand

Standard cartridge faucets from Moen, Delta, and Kohler are straightforward to repair. Older compression faucets or specialty fixtures may take longer and cost more.

03Parts needed

Standard cartridges and seals are included in the quote. Specialty parts or a full faucet replacement add to the cost. We tell you before ordering anything.

04Supply line and valve condition

If the shutoff valve will not close or the supply lines are brittle, we replace them during the repair. That adds parts and a small amount of labor.

Proof you can check

Licensed, insured, and accountable

✓
Georgia Master Plumber LicenseGeorgia State Plumbing Board
✓
Journeyman Plumber LicenseGeorgia State Plumbing Board
✓
Backflow Prevention CertificationGeorgia State Plumbing Board
✓
OSHA Safety CertificationOccupational Safety and Health Administration
Customer reviews

What Decatur customers say

★★★★★
“Our kitchen faucet had been dripping for weeks and I kept putting it off. They came out the same day I called and had the cartridge replaced in under an hour. The price was exactly what they quoted. No more drip, no more wasted water. I will use them again for the bathroom faucet when it starts acting up.”
SM

Sarah M.Homeowner, Winnona Park

✓ Verified
★★★★★
“Called about a faucet leak that was getting worse. They arrived in the two-hour window they promised and diagnosed a cracked valve body. Quoted a replacement instead of a repair that would not last. New faucet installed and tested the same visit. Professional and honest about what needed to be done.”
LK

Linda K.Homeowner, Downtown Decatur

✓ Verified
Good questions

Faucet repair questions we hear every week

(831) 293-1204 →

Most faucet repairs in Decatur run $150 to $350 including parts and labor. A simple cartridge swap on a kitchen faucet is usually at the lower end. A bathroom faucet with a corroded valve seat or difficult access runs higher. We give you the exact price before we start. No hidden fees, no hourly surprises.

The most common cause is a worn cartridge or O-ring inside the faucet body. Decatur's hard water leaves mineral deposits that grind down rubber and plastic parts over time. A damaged valve seat can also cause drips. We take the faucet apart, find the exact failure point, and replace what is worn.

You can replace a cartridge or aerator if you are comfortable with basic tools. But if the valve seat is damaged or the faucet body is cracked, a DIY fix will not hold. You also risk cross-threading connections and causing a leak worse than the one you started with. We handle the diagnosis and repair so it is done right.

Most repairs take 45 to 90 minutes from arrival to cleanup. A simple cartridge replacement is closer to 45 minutes. A faucet with corroded valves or hard-to-reach supply lines can take longer. We give you a time estimate when we quote the job. Same-day appointments are available for most calls.

Ready when you are

Get your faucet repair Decatur GA scheduled today

We are licensed, insured, and ready to fix your faucet. Same-day appointments are available for most calls. Call us now and we will give you a straight price over the phone.

Book repair now (831) 293-1204 →
Request an appointment

Contact Our Decatur Plumbing Team

Call us anytime, day or night. Our dispatch line is open 24/7 for emergencies, and our office is staffed Monday through Friday from 8 a.m. to 6 p.m. for scheduling and questions. We serve all of Decatur, Georgia and the surrounding DeKalb County area. If you have a leak, a clog, or no hot water, call now and we will get a plumber headed your way.

Call anytime(831) 293-1204Email the office[email protected]
Office hoursOpen 24 hours · 7 days a week
Request received — our team will be in touch shortly.
Tap to call(831) 293-1204